UTV & ATV lighting
UTV & ATV Lights, Chosen by Mounting Position
Build a lighting range around the front, roof, cage and cargo areas. Compare auxiliary lamps by beam, mounting space and electrical requirements.
01 · Working areas
Where auxiliary lights fit on a UTV or ATV
Start with the mounting point and job. For each vehicle, confirm available space, tube diameter, beam aim and electrical supply.
Position map is illustrative. Verify each lamp, bracket and circuit against the vehicle before ordering.
- 1Front bumper and grilleCompact pods and bars for forward auxiliary lighting. Check beam aim and space behind the mounting face.See the models ↓
- 2Roof and roll cageConsider larger lamps where the cage or roof bracket supports the size and current draw.See the models ↓
- 3A-pillar and side cageMatch tube clamps to the measured tube diameter and keep the operator’s sightline clear.See the models ↓
- 4Cargo bed and rear work areaUse a work beam for loading, recovery or service tasks around the rear of the vehicle.See the models ↓
- 5Accent and trail visibilityBrowse RGB whips for appearance builds; warning lights are listed separately below.See the models ↓
02 · The range
DXZ lighting for UTV and ATV applications
Compact off-road pods and bars
↑ Back to areasBracket and flush-mount pods in spot, flood and combo formats. Match the beam, lamp envelope and mounting hardware to the available bumper, hood or cage position.
Driving lamps for larger builds
↑ Back to areas7-, 9- and 10-inch round or rectangular auxiliary lamps. Review these for larger UTV and side-by-side builds with adequate bracket space and electrical capacity.
Cargo and utility work lights
↑ Back to areasWork-light forms for cargo areas, rear-facing tasks and side coverage. Choose spot, flood or combo optics for the distance and width to be lit.
Amber and white/amber visibility lights
↑ Back to areasCompact modules, bars and linear strips for utility and worksite visibility. Select the required color and flash behavior for the destination market.
RGB whips and accent lighting
↑ Back to areasSingle and paired 2-foot RGB whips, with smooth or textured base options. Match the base and mount to the cage or bracket.
Before ordering, confirm model-specific input voltage, operating current, dimensions, beam variant, wiring and destination-market requirements on the selected product page.
UTV & ATV Auxiliary Lighting for OEM and Retrofit Projects
DXZ supplies auxiliary lighting, work lights, warning and appearance products for UTV/ATV importers, distributors, private-label brands and retrofit shops. Select by mounting point, beam and circuit.
Share the vehicle make and model year, a mounting photo, tube diameter, wiring route and target market. DXZ can review clearance, beam needs, labeling and packaging requirements with your team.
Explore DXZ Customization
Plan a UTV or ATV Lighting Project
Building a dealer range or planning a retrofit? Send the vehicle model, mounting points, tube diameter, beam requirements and quantity. DXZ can help shortlist products or prepare a sample.
Discuss Your ProjectWhat a UTV or ATV Lighting Setup Needs
UTVs and ATVs have limited mounting space, exposed wiring and fast-changing terrain. Select each lamp for its position and confirm the vehicle’s electrical capacity.
- Dust and water. Check the selected model’s ingress rating and protect connectors at the installed position.
- Vibration. Check tube diameter, bracket clearance and fixing points; route cables clear of moving parts.
- Electrical load. Confirm current draw and harness capacity; leave clearance around the housing.
- Glare. Aim beams away from the windshield, mirrors and nearby reflective surfaces.
Where the Lights Go on a UTV or ATV
Match each auxiliary light to the mounting point and the work it needs to cover.
- Front bumper and grille
- Roof and roll cage
- A-pillar and side cage
- Cargo bed and rear work area
- Worksite visibility positions
- Accent lighting positions
Work with DXZ from Sample to Order
UTV/ATV importers, dealers, private-label brands and retrofit shops can start with a sample, confirm fit and electrical details, then plan a production order.
- Choose the range. Compare pods, driving lamps, work lights and accessories for the vehicles you sell or fit.
- Check the sample. Confirm tube clearance, mounting position, beam coverage and wiring on the vehicle.
- Set up your brand. Confirm the logo, packaging and order quantity for the selected models.
- Get the right documents. Share selected model numbers and destination market when requesting available product documents.
“Very well built waterproof and bright”
How DXZ Tests Vehicle Work Lights
DXZ uses its in-house lab to measure light output and beam shape and to assess how lamps respond to environmental and mechanical stress.
- Beam coverage. Beam measurements show how light is distributed across the working area.
- Light output. An integrating sphere measures luminous flux and colour temperature.
- Water and dust. Rain, dust, and sealing checks assess how the housing protects the lamp.
- Vibration. We check how the lamp assembly holds up under repeated movement.
- Temperature and humidity. Environmental tests assess how the lamp responds to heat, cold, and moisture.
- Corrosion and ageing. Lab tests assess corrosion resistance and performance over extended operation.
What DXZ Tests In-House
Our lab measures light output and beam shape and checks how lamps respond to environmental and mechanical stress.
Light Output
An integrating sphere measures luminous flux and colour temperature.
Beam Pattern
Photometric measurements show how the lamp distributes light across the working area.
Enclosure Sealing
Sealing checks assess how the enclosure protects the lamp against ingress.
Temperature & Humidity
Environmental testing checks how the lamp responds to temperature and moisture exposure.
Mechanical Reliability
Mechanical checks assess how the lamp assembly responds to stress.
Ageing
Ageing tests help the team assess performance over extended operation.
UTV / ATV Lighting Guides
Choose UTV / ATV Auxiliary Lights
Compare beam, mounting format and supply requirements for the intended position.
Wire LED Work Lights
Plan the relay, fuse, and cable run.
Compare Spot, Flood, and Combo Beams
See how beam shape changes where the light lands.
Request a Quotation
Send vehicle make/model/year, mounting position, tube diameter, working distance, supply voltage, quantity and any branding or packaging requirements.
Request a Quotation
















































































































Download the DXZ Lighting Catalog for product ranges, specifications, and available configurations.
