A harness carries the current from the battery to the lamps. The current range and the operating voltage are published on all eight models. The recommended load, which says how much lamp the harness is meant to feed, is on seven of them; the wireless-controller model does not list a recommended load.
Two harnesses can look identical and be rated for very different loads, so choose by the total wattage on the circuit.
What decides the specification
Total load first
Voltage range
One or two leads
Control method
Wire gauge and fusing
Models compared
Products in this range
Dual-Lead 12–24V LED Light Wiring Harness with Wired Controller – XS-BF-2
12–24 V
Dual-Lead 12–60V LED Light Wiring Harness with Wired Controller – XS-M-2
12–60 V
12V 30A Dual-Output LED Light Wiring Harness – XS-PT-2
12 V
12V Dual-Output LED Light Wiring Harness with Wireless Controller – XS-M5-2
12 V
How to read the ratings
- Recommended load is the figure DXZ publishes for the harness. It is not the same as the current rating, and the two should be read together.
- A 12 V 30 A harness with a 0–100 W recommended load is intended for lamps up to about 100 W total, even though the contacts and fuse are rated higher.
- None of these harnesses carries a certification claim on its product page. Do not specify them as E-marked or type-approved components.
- For a lamp with a short flying lead, the harness supplies the run to the switch and battery; it does not replace the lamp’s own cable.
Questions buyers ask
Which harness do I need for two 24 W work lights?
48 W total. The 12–24 V harness with an 80 W recommended load or the 12 V 30 A harness rated 0–100 W both cover it; the 40 W harness does not.
Is a 30 A harness suitable for a 300 W bar?
No. The recommended load on the 12 V 30 A harness is 0–100 W. A 300 W bar needs a different solution, not a higher fuse.
Can I use the same harness on a 24 V machine?
Only if the harness is rated for it. The range includes 12–24 V and 12–60 V models; the 12 V models are 12 V only.
Do the harnesses include a relay and fuse?
The 12 V 30 A model is supplied with blade terminals and three fuses. Check the ‘included control / hardware’ row for each model.
Are these harnesses certified?
No certification is listed for the harness range. They are supplied as vehicle wiring accessories, not as type-approved components.
Related ranges and guides
Request a quotation
Send the harness model, the total load on each circuit and your supply voltage. We will reply with the harness that matches those numbers and a quote.



