LED Tractor Lights for Agricultural Equipment

Illustrative tractor fieldwork scene at dusk, with work lights illuminating the cultivated ground.

Agricultural lighting

Tractor Work Lights, Chosen by Working Area

Find the mounting area first. It decides the beam; the wattage question comes afterwards.

02 · The range

Work lamps for tractor mounting

Sixteen white work lamps, grouped by mounting position. Every one runs on 9–36 V, covers 12 V and 24 V machines, and carries CE / ECE R10. None of them carries a marker or position light: those are a separate product line.

1

Front working area

↑ Back to areas

The headland and the ground ahead. A narrow, long beam, because the target is farther away than the implement.

‹ ›
4-Inch 25W Round Spot, front view.
4″

4-Inch 25W Round Spot

25 W · 1,922 lm · IP67/IP69K

Single spot body for a straight run down the field edge.

View product
6-Inch 44W Spot/Flood, front view.
6″

6-Inch 44W Spot/Flood

44 W · 2,919 lm · IP68/IP69K

Highest output here, with either beam in the same housing.

View product
5-Inch 43W Spot/Flood, front view.
5″

5-Inch 43W Spot/Flood

43 W · 2,827 lm · IP68/IP69K

Mid-size dual-beam body when the 6-inch outline is too wide.

View product
2

Cab roof

↑ Back to areas

The highest fixing point, and the one that lets a rear-facing lamp see past the implement. One housing takes either beam.

‹ ›
4-Inch 25W Spot/Flood, front view.
4″

4-Inch 25W Spot/Flood

25 W · 1,768 lm · IP68/IP69K

The compact dual-beam body; bracket and outline stay the same either way.

View product
6-Inch 34W Spot/Flood, front view.
6″

6-Inch 34W Spot/Flood

34 W · 2,130 lm · IP68/IP69K

Six-inch dual-beam body for a roof run that needs more area per lamp.

View product
3

Rear implement area

↑ Back to areas

Wide, close coverage across the working width. This is where flood beats spot.

‹ ›
6-Inch 25W Flood, front view.
6″

6-Inch 25W Flood

25 W · 1,774 lm · IP67/IP69K

Strongest six-inch flood for a wide implement behind the machine.

View product
4-Inch 25W Perimeter Flood, front view.
4″

4-Inch 25W Perimeter Flood

25 W · 1,529 lm · IP67/IP69K

Perimeter flood that spreads light across the width rather than the distance.

View product
5-Inch 25W Wide-Body Flood, front view.
5″

5-Inch 25W Wide-Body Flood

25 W · 1,517 lm · IP67/IP69K

Wide-body flood, five-inch outline, for a fender or roof edge.

View product
4

Implement fill light

↑ Back to areas

Close work on the implement body, where a large flood washes out the detail you are trying to see.

‹ ›
17W Flood, front view.

17W Flood

17 W · 1,372 lm · IP67/IP69K

Compact flood for the implement frame; check the fixing face first.

View product
4-Inch 26W Compact Flood, front view.
4″

4-Inch 26W Compact Flood

26 W · 1,367 lm · IP67/IP69K

Short square flood for a tight bracket position.

View product
4-Inch 19W Round Flood, front view.
4″

4-Inch 19W Round Flood

19 W · 1,217 lm · IP67/IP69K

Round flood body, useful where the bracket sits on a tube.

View product
3-Inch 15W Flood, front view.
3″

3-Inch 15W Flood

15 W · 983 lm · IP67/IP69K

Smallest body here, for a lamp position with almost no room.

View product
4-Inch 25W Round Flood, front view.
4″

4-Inch 25W Round Flood

25 W · output on request · IP68/IP69K

Round flood with an IP68 rating; output quoted per part number.

View product
5

Rear lamp and fender

↑ Back to areas

The low position by the wheel. Combo housings cover the near field and the row together.

‹ ›
4-Inch 29W Square Combo, front view.
4″

4-Inch 29W Square Combo

29 W · 2,398 lm · IP67/IP69K

Combo optic covering near field and row in one lamp.

View product
4-Inch 18W Combo, front view.
4″

4-Inch 18W Combo

18 W · 1,233 lm · IP67/IP69K

Combo body in the smaller square outline.

View product
4-Inch 17W Combo, front view.
4″

4-Inch 17W Combo

17 W · 1,047 lm · IP67/IP69K

Lowest output combo, for close work beside the wheel.

View product

Flux figures are sphere measurements at 13.2 V. Rated power, operating current and ingress protection sit on the product page for that part number, so quote the model and the beam variant.

Custom Work Lights for Agricultural Machinery

DXZ adapts existing LED work lights and develops new designs for agricultural equipment. We start with where the light has to fit and what it has to illuminate.

Share a drawing, a mounting photo, or a reference lamp. We’ll review the mounting space and beam requirements with your team. For private label orders, we can also quote laser branding and custom packaging.

Explore DXZ Customization

Let’s Talk Through Your Lighting Project

Building a range for dealers or fitting lights to a machine? Send us the equipment type, where the lamps will sit, and how many you need. We’ll help you choose a model or plan a sample.

Discuss Your Project

What Fieldwork Demands from a Lamp

Farm machines work through dust, rain, and long shifts. The right lamp depends on where it mounts and what the operator needs to see.

  • Mud and wash-down. Check the enclosure rating and keep connectors clear of direct spray.
  • Vibration. Check the bracket and fixing points, especially on implements and booms.
  • Long shifts. Check the electrical load and leave room around the housing for cooling.
  • Glare. Aim the beam away from cab glass, mirrors, and nearby reflective panels.

Where the Lights Go

We help buyers match work lights to the equipment and the task.

  • Tractor cabs and fenders
  • Combine headers
  • Forage harvester work areas
  • Sprayer booms
  • Loader work areas
  • Seeders and rear implements
See Tractor Mounting Positions

Work with DXZ from Sample to Order

Importers, dealers, private label brands, and retrofit shops can start with a sample and confirm the details before placing a bulk order.

  • Choose the range. Compare flood and spot models for the equipment you sell or fit.
  • Check the sample. Confirm the bracket clearance and beam coverage on the machine.
  • Set up your brand. Confirm the logo, packaging, and order quantity for the chosen model.
  • Get the right documents. Share the part number and destination market when requesting reports or certificates.

“I am satisfied as the quality is the same as the sample.”

Work light buyer · South Korea · January 2024

How DXZ Tests Agricultural Work Lights

DXZ uses its in-house lab to check how work lights perform in conditions farm machinery sees every season, from dusty fields to wet weather and long shifts.

  • Beam coverage. We map where the light falls to assess coverage across implements and around the machine.
  • Light output. An integrating sphere measures luminous flux and colour temperature.
  • Water and dust. Rain, dust, and sealing checks assess how the housing protects the lamp.
  • Vibration. We check how the lamp assembly holds up under repeated movement.
  • Temperature and humidity. Environmental tests assess how the lamp responds to heat, cold, and moisture.
  • Corrosion and ageing. Lab tests assess corrosion resistance and performance over extended operation.

What DXZ Tests In-House

Our lab measures light output and beam shape and checks how lamps respond to environmental and mechanical stress.

Light Output

An integrating sphere measures luminous flux and colour temperature.

Beam Pattern

Photometric measurements show how the lamp distributes light across the working area.

Enclosure Sealing

Sealing checks assess how the enclosure protects the lamp against ingress.

Temperature & Humidity

Environmental testing checks how the lamp responds to temperature and moisture exposure.

Mechanical Reliability

Mechanical checks assess how the lamp assembly responds to stress.

Ageing

Ageing tests help the team assess performance over extended operation.

Visit the DXZ Laboratory

Work Light Guides

Request a Quotation

Send the equipment type, mounting position, working distance, supply voltage, and estimated quantity. Include any branding or packaging requirements.

Request a Quotation