20-Inch LED Light Bars

LIGHT BAR FAMILY

A 20-inch bar is usually chosen for a roof, bumper or rack position where the space is fixed and the beam has to reach. The two DXZ bars in this size are both spot bars with an RGB accent, but they differ in output, input range, control, certification and published length, and those are the differences that decide the specification.

Lumen figures follow the product page: measured where a test is named, theoretical where the figure is calculated from the LEDs.

Lamp length560 mm lamp, 615 mm overall with brackets on the 120 W model; not published on the 164 W model
Input voltage9–30 V or 9–36 V depending on model
BeamSpot, with RGB accent
CertificationCE / ECE R10 listed on the 120 W model

What decides the specification

Length and brackets

What to checkThe size label and the published length are not the same thing. Check the mounting width with brackets on the exact model before choosing a roof or bumper position.DXZ range on this page560 mm lamp, 615 mm overall with brackets on the 120 W model; the 164 W model publishes no lamp length at all

Output, measured or theoretical

What to checkTheoretical lumen figures are calculated from the LEDs; measured figures come from a test. Compare like with like.DXZ range on this page6,893 lm measured and 40,000 lm theoretical on the 120 W model; 3,648 lm per lamp on the 164 W model, with no measurement method stated

Control

What to checkOne model switches main light, RGB accent and a yellow flashing mode on the harness; the other has an RGB accent border.DXZ range on this pageHarness switch A/B/C on the 164 W model

Voltage range

What to checkA 9–36 V bar also suits a 24 V machine; a 9–30 V bar is a 12 V/24 V road-vehicle rating.DXZ range on this page9–30 V DC and 9–36 V DC

Certification

What to checkWhere a certification is listed on the product page it applies to that model, not to the whole family.DXZ range on this pageCE / ECE R10 on the 120 W model

Models compared

Products in this range

Before you specify a 20-inch bar

  • Both bars are spot beam. If the job needs wide area light around the vehicle, a pair of pods or a flood work light will do it better than a spot bar.
  • The RGB accent and the yellow flashing mode are secondary functions. They are not a road-legal signal and should not be specified as one.
  • Current draw matters at 12 V: the 120 W bar is rated 10 A. Size the harness and fuse for the bar plus anything else on the circuit.
  • Do not use the packaging figure as a length. The 164 W model is sold as a 20-inch bar, but its specification table has no lamp-length row: the only 846 × 125 × 120 mm figure on that page is the package size, and the 120 W bar lists the same package size for a 560 mm lamp. Treat 846 mm as a carton measurement, ask us for a drawing, and measure the mounting space before ordering.

Questions buyers ask

What is the actual length of a 20-inch bar?

The 120 W model is 560 × 95 × 70 mm for the lamp and 615 mm overall with its brackets. The 164 W model does not publish a lamp length; its specification table only gives a 846 × 125 × 120 mm package size, which is the carton and cannot be used for fitment. Ask us for the drawing of that model before you cut or drill anything.

Are both bars 24 V compatible?

The 120 W model is rated 9–36 V and the 164 W model 9–30 V. Both cover a 24 V system, but confirm against the exact model.

Is the RGB accent usable while driving?

It is a secondary decorative light. Check local rules before using it on a public road, and do not treat the yellow flashing mode as a warning signal.

Can I get a harness with the bar?

The bars are listed with their cable and control arrangement; a separate rated harness is available in the wiring harness range.

Do you supply other lengths?

Yes, the LED light bar category lists the other models. Lengths and power options vary by model, so check the spec row rather than assuming a size from the name.

Related ranges and guides

Request a quotation

Send the model, the mounting width you have with brackets, the supply voltage and the quantity. We will reply with the bar that matches those numbers and a quote.

Start an enquiry