Interactive light science

Why does a forklift light feel brighter at 3 m than at 8 m?

Move the worker closer to or farther from the same lamp. See how estimated eye-level illuminance changes—without changing the lamp itself.

Warehouse aisle · Side view

Live simulation
Forklift work light facing a worker at a variable distance As you change the distance, the worker moves and the estimated illuminance changes. FORKLIFT 5.0 m Same lamp · Same direction

Illustration only. Glow is not a calibrated representation of human glare perception.

Estimated illuminance at eye
24.0 lx
Lamp 2.4 m · eye 1.2 m
Compared with 8 m
2.56×
Same lamp, same peak intensity
Slant distance
5.1 m
Off-axis angle
13.6°
Intensity at that angle
558 cd
Apparent lens size
0.000302 sr

Try it yourself

5.0 m
2 m · Closer12 m · Farther
1,764 cd
200 cd1,800 cd

Candela measures light intensity in a specific direction—not total lumens.

Use arrow keys to move the worker along the warehouse aisle.

What this demonstrates

At 5 m, the same light delivers about 2.6 times the illuminance it would at 8 m. This is not a glare safety rating.

Estimated eye-level illuminance falls as distance increases

Based on E ≈ I(θ) / d², lamp 2.4 m · eye 1.2 m

2 m4 m6 m8 m10 m12 m Distance from lamp lux 24.0 lux

The simple physics

E ≈ I(θ) / d²
Two corrections make this honest. The lamp sits 2.4 m up and the eye 1.2 m, so the slant distance is d = √(x² + 1.2²), not the flat distance on the slider. And intensity falls as the viewing ray leaves the beam axis, so I is taken at the angle θ between the beam and the eye — not at the peak.

What it does not tell you

Lux at eye level is not a glare rating. Real visual discomfort also depends on lens brightness, viewing angle, background lighting, reflections and beam distribution. Actual installations require on-site checks.

Engineering illustration, not a product certification or a safety assessment. It models one lamp in a clean aisle: point-source falloff, a 2.4 m lamp against a 1.2 m eye, and intensity read from the lamp's measured distribution. Reflections, cutoffs, ambient lighting and real observer variation are excluded. Sources: IES inverse-square law · HSE workplace transport lighting guidance.